HydroQuip 15" Baptismal 5.5kW Heater Assembly [240V] [3-Wire] (BHS-55-3W-15)

HydroQuip 15" Baptismal 5.5kW Heater Assembly [240V] [3-Wire] (BHS-55-3W-15) — The HydroQuip 15" BHS-55-3W baptismal heater assembly serves vertically mounted circulation-style baptistry heating equipment. Its 5.5kW heating capacity is paired with a 240V, three-wire electrical configuration and a 15" heater length. HydroQuip identifies this configuration as having no pump circuit; it must not be assumed to control or supply the circulation pump. For churches and facility maintenance teams, the critical choice is matching the existing heater length, system connections and electrical arrangement to the equipment already installed.

Product Features & Benefits

• 15" heater length, distinguished from the other available BHS-55-3W size.
• 5.5kW heater for 240V, 3-wire baptismal heating systems.
• 304 stainless steel heater housing described in the BHS/BES-55 family documentation.
• Full-range thermostat in the manufacturer-described system configuration.
• High-limit protection to help safeguard the heating assembly.
• Pressure-switch-activated heating in the specified circulation-style system.
• No pump circuit, as explicitly indicated for this assembly.
• HydroQuip series documentation describes installation instructions and wiring information; check what accompanies the individual replacement.

Technical Specifications

• Manufacturer: HydroQuip
• Model: BHS-55-3W (15" version)
• Heater length: 15"
• Power rating: 5.5kW
• Electrical specification: 240V, 3-wire
• Pump circuit: None
• Manufacturer catalog identifier: C08BK00-0006120

Choosing the Correct Replacement

This listing is for the 15" version, not the other BHS-55-3W heater length. Measure the original assembly and compare its clearance, terminals, plumbing interface and system labeling. The BHS family includes more than one length and electrical configuration. A matching power rating by itself is insufficient. If you are replacing an older vertically mounted circulation-style unit, confirm the existing control, pressure switch and wiring diagram before ordering.

Installation & Safety

The circulation pump and pressure-operated protection must function correctly before the heater is energized. Installation and wiring should be completed by a qualified professional using the applicable manufacturer manual and local electrical requirements. Never bypass a pressure switch or high-limit device to operate a baptismal heater.