HydroQuip 6" Circulation Pump Adapter Cord [4-Pin Violet To 3-Pin Molded] (30-1190-C6)

HydroQuip 6" Circulation Pump 4-Pin Violet Plug to AMP Adapter Cord, HydroQuip part number 30-1190-C6, is a pump motor connection or connector adaptation for a specified spa pump position. This listing identifies the exact replacement by its supplier reference, rather than treating similarly named spa leads as interchangeable. The key details below should be checked against the equipment already installed before placing an order.

Features & Specifications

• HydroQuip part number: 30-1190-C6; verify this number against the original cable or supplier listing.
• Cable length: 6" as identified in the supplied product information.
• Known designation: AMP as identified in the supplied product information.
• Known designation: 4-Pin as identified in the supplied product information.
• Supplier identification: Adapter, Violet Plug/AMP, 4-Pin.

Purpose & Application

Pump leads link a motor or pump assembly to the control pack through the specified connector system. A Pump 1 lead and a Pump 2 lead are not interchangeable solely because they are the same length. Likewise, a one-speed motor connection and a two-speed motor connection can call for different conductor arrangements and control outputs.

Choosing the Correct Replacement

Check the designated pump position, motor speed configuration, conductor count and gauge, connector ends, and original harness routing. Some replacement cords use molded, color-identified ends while others use AMP-style plug or receptacle connections. Verify the exact control-pack output and motor wiring diagram instead of choosing only by plug color.

Before You Order

• Confirm Pump 1 versus Pump 2 and one-speed versus two-speed wiring requirements.
• Compare the length and cable routing, allowing for safe strain relief and connector access.
• Compare the mating plug type, pin arrangement and keyed housing; do not rely on color alone.
• Check the original electrical ratings and wiring diagram where a powered component is involved.

Installation & Service Considerations

Disconnect power before electrical service. Have a qualified technician inspect wiring, connector engagement, strain relief and the equipment installation requirements.

Why the Exact Part Number Matters

The correct part number and plug arrangement are more reliable fitment checks than a similar-looking cable. Compare the original connection and equipment documentation before ordering.

Replacement reference: 30-1190-C6. If your original part number is unreadable, confirm the terminal or plug shape and the required equipment configuration before substituting this assembly. Use a qualified spa professional for electrical work.