HydroQuip Baptistry 6.0kW Immersion Heater [240V] (BIS-60-240-GF-5)

HydroQuip Baptistry 6.0kW Immersion Heater [240V] [5' Cord] [Float] (BIS-60-240-GF-5) — This HydroQuip 6.0kW baptistry immersion heater is designed to warm water in an indoor baptismal tank or comparable approved reservoir without requiring a permanently plumbed circulation heater. The BIS-60-240-GF-5 model has a 5' GFCI-equipped power cord and a 240V nominal electrical configuration. Its integrated water-level float is a key distinguishing safety feature, intended to respond when the water level falls below the float operating position. It provides adjustable temperature control in the manufacturer-specified 60°F to 90°F operating range for planned indoor baptistry use. The heater is a purpose-built immersion unit, not a spa or hot tub heater.

Product Features & Benefits

• 6.0kW immersion heating element with 240V model designation.
• 5' GFCI power cord for the specified electrical configuration.
• 316L stainless steel heating element, as identified for this HydroQuip series.
• Adjustable thermostat with a positive OFF position.
• Visible heater-on indicator to show when the unit is calling for heat.
• Manual-reset high-limit protection with a tripped indicator light.
• Top-mounted lifting handle and adjustable stainless mounting brackets.
• Water-level safety float switch included.
• Recommended operating temperature range: 60°F–90°F.

Technical Specifications

• Manufacturer: HydroQuip
• Series: BIS baptistry immersion
• Heater rating: 6.0kW
• Nominal voltage: 240V
• Cord length: 5'
• GFCI cord: Yes
• Water-level float: Yes
• Water temperature control: Adjustable, 60°F–90°F
• Electrical class: 30A 240V configuration

Choosing the Correct Replacement

Choose BIS-60-240-GF-5 when the existing unit requires the 5' cord and a float-equipped immersion heater. The G and GF model designations should not be treated as identical; the safety-float difference matters. Likewise, the 5-foot and 16-foot cords have different installation implications. Match the supply voltage and the exact approved connection method with the manufacturer instructions, not just the nominal heater wattage. The BIS immersion family is not the same as a BHS or BCS inline circulation heater. HydroQuip identifies BIS-60-240-GF as an earlier model replaced by BIS-60-240-GF-5; verify the full equipment configuration before substituting.

Installation & Safety

Important indoor-use instructions: this is for general-purpose tank or reservoir immersion heating and is not intended for spas, hot tubs, or outdoor installation. Read the instructions before use. Never run the element dry, submerge the control enclosure or GFCI device, bypass protection, or allow anyone into the water while the heater is energized. Test the GFCI as directed, maintain safe water coverage, and allow the element to cool before lifting it by its handle. A qualified electrician should verify the supply and all connections.

Manufacturer replacement reference: BIS-60-240-GF. Confirm the original model and options before ordering.

IMPORTANT: HydroQuip Immersion Heater Instructions (PDF) — Read Before Installation & Use
Review the operating, electrical and water-safety directions before connecting or operating this heater.